Containerised LFP battery system 215 kWh / 100 kW

Containerised LFP battery system 215 kWh / 100 kW. Lithium iron phosphate storage for factories: it stores midday solar for the evening, shaves the maximum demand that sets the monthly demand charge, and carries critical loads through grid outages so the generator starts less often.

Key features

• Energy: 215 kWh
• Power: 100 kW
• Cycles: ≈ 6000 at 90% DoD
• Standards: IEC 62619, UN 38.3

Typical uses

• Shifting surplus solar into the evening peak
• Keeping maximum demand under the contract limit
• Riding through short outages without starting the generator

Connecting to Plantmargin

The battery management system and power conversion connect over Modbus TCP; Plantmargin shows every kWh in and out, the round-trip efficiency and the cycles used. Plantmargin reads battery power, state of charge and cycles every 10 seconds through the edge gateway, stores it for years as hourly figures, draws it against its normal band, and uses it in cost per unit, alarms and verified savings. The installer pack for your plant lists the exact register or channel to use.

Sizing

• Plantmargin sizes the battery from the plant's own metered load and outage history, and only recommends it where it pays.

Installation

• In a ventilated, fire-separated room or container, with the manufacturer's clearances and suppression, by licensed technicians.

Warranty and support

• Manufacturer's warranty, usually 12–24 months from delivery; the exact period is stated on your quotation.
• Supplied with the datasheet and manual; calibration or test certificate where the product has one.
• Installation, commissioning and connection to Plantmargin can be quoted with the product.