Three-phase CT-operated energy meter, Modbus TCP

Three-phase CT-operated energy meter, Modbus TCP is an energy meter for industrial plants. It gives Plantmargin the energy and power of one feeder, so the cost of each section and machine can be seen hour by hour.

Key features

• Accuracy: Class 0.5S
• Current input: via /5 A CTs
• Communication: Ethernet, Modbus TCP
• Measures kW, kVA, kvar, power factor, voltage and current per phase, and import/export kWh

Typical uses

• Each production section's feeder or MCC
• Large motors, compressors, chillers and dryers
• Sub-metering of offices, lighting and utilities

Connecting to Plantmargin

Plug the meter into the plant network; the gateway reads it over Modbus TCP. Plantmargin reads energy, power, power factor and demand every 10 seconds through the edge gateway, stores it for years as hourly figures, draws it against its normal band, and uses it in cost per unit, alarms and verified savings. The installer pack for your plant lists the exact register or channel to use.

Installation

• DIN-rail or panel mounting inside an existing MCC or a small meter enclosure.
• CT-operated meters need one current transformer per phase; choose the CT ratio so normal load is 50–100% of its rating.
• Work inside panels is done by a licensed electrician under the site's permit to work, with the supply isolated.

Before you order

• Tell us the feeder's voltage, normal and maximum current, and whether the panel has space and a 230 V supply.
• For several meters on one RS485 line, each needs its own Modbus address (we set them before delivery if you ask).

Warranty and support

• Manufacturer's warranty, usually 12–24 months from delivery; the exact period is stated on your quotation.
• Supplied with the datasheet and manual; calibration or test certificate where the product has one.
• Installation, commissioning and connection to Plantmargin can be quoted with the product.